# null

[Open topic with navigation](../../../../../CANoeDEFamily.htm#Topics/CAPLFunctions/LIN/Functions/CAPLfunctionLINSetRespBitStream.md)

[CAPL Functions](../../CAPLfunctions.md) » [LIN](../CAPLfunctionsLINOverview.md) » linSetRespBitStream

# linSetRespBitStream

[Valid for](../../../Shared/FeatureAvailability.md):  CANoe DE

## Function Syntax

```plaintext
long linSetRespBitStream (long frameId, byte bitStream[], long numberOfBits); // form 1
long linSetRespBitStream (long frameId, byte bitStream[], long numberOfBits, long timeoutPrevention); // form 2
long linSetRespBitStream (long frameId, byte bitStream[], long numberOfBits, long timeoutPrevention, long count); // form 3
```

## Description

Sets up a bitstream as the response to the specified frame.

## Parameters

* **frameId**: LIN frame identifier in the range 0 .. 63
* **bitStream**: The bitstream array to be sent as a response. Maximum number of bits: 2^31-1.
* **numberOfBits**: Number of bits in the bitStream array to be sent.
* **timeoutPrevention**:
  * 0: deactivates the timeout prevention for the 7259-transceiver.
  * 1: activates the timeout prevention for the 7259-transceiver.
* **count**: Number of times, the bitstream shall be sent as a response before deactivating itself.

## Return Values

On success, a value unequal to zero, otherwise zero.

## Example

Send LIN response for the frame **MotorControl** as a bitstream.

```plaintext
// The response consists of 8 data bytes and checksum 
// byte. There are no interbyte spaces.
// Response: [D0=0x1, D1=0x2, D2=0x4, D3=0x8, D4=0x10, D5=0x20, D6=0x40, D7=0x80, CS=0x52]
on key 'r'
{
    linFrame MotorControl mMotorControl;
    byte bitStream[12];
    long numberOfBits;
    // binary stream = 0100000001 0010000001 0001000001 0000100001 0000010001
    // binary stream (continue) = 0000001001 0000000101 0000000011 0010010101
    bitStream[0] = 0x2;
    bitStream[1] = 0x12;
    bitStream[2] = 0x88;
    bitStream[3] = 0x20;
    bitStream[4] = 0x84;
    bitStream[5] = 0x20;
    bitStream[6] = 0x2;
    bitStream[7] = 0x9;
    bitStream[8] = 0x28;
    bitStream[9] = 0xC0;
    bitStream[10] = 0xA4;
    bitStream[11] = 0x2;
    numberOfBits = 90; // Each byte requires 10 bits (start bit + data bits + stop bit)
    if (0!=linSetRespBitStream(mMotorControl.id, bitStream, numberOfBits))
    {
        // for the next response of frame "MotorControl" is as specified
    }
}
```

[linResetRespBitStream](CAPLfunctionLINResetRespBitStream.md)
