Classes
Valid for: CANoe DETrigger Configuration
- CanDisturbanceFrameTrigger: A configurable frame trigger for a CAN/CAN FD frame. Every field of a CAN/CAN FD frame is configurable. The position of the frame trigger is configurable.
- CanDisturbanceCombinedFrameTrigger: Combination of up to 32 frame triggers. The position of the trigger can be configured once for all frame triggers.
- CanDisturbanceExternalTrigger: Configuration options for external trigger inputs.
- CanDisturbanceErrorFrameTrigger: A configurable trigger condition for CAN/CAN FD error frames.
Sequences
- CanDisturbanceSequence: A user-defined sequence is sent directly on the bus or can be used in combination with a trigger.
- CanDisturbanceBitSequence: A sequence describes a bit sequence within a CanDisturbanceFrameSequenceField. With this class, it is possible to define a user-defined sequence within a frame sequence. A typical use case is to insert a glitch within a bit near the sample point or to lengthen or shorten a bit. 8 transitions of levels are possible within a bit. The segment with the array index 0 is sent first on the bus.
- CanDisturbanceFrameSequenceField: Contains the bits for a field of a CAN/CAN FD frame. A field can contain one or several bits.
- CanDisturbanceFrameSequence: Represents a CAN/CAN FD frame as sequence. Contains all fields of a CAN/CAN FD frame.
Repetitions
- CanDisturbanceTriggerRepetitions: Can be used to configure repetitions and cycles for a frame trigger in combination with a sequence or only a sequence.