CAPL Functions » Scope » Class: scopeBitDataDutyCycle
Valid for: CANoe DE • CANoe:lite DE
This structure contains all relevant values to measure a duty cycle within a frame. The following figure shows the parameters needed to measure the duty cycle. For measure the duty cycle a dominant->recessive->dominant or recessive->dominant->recessive bit pattern is needed. Only in this case it is possible to measure the needed time values for the duty cycle. The different thresholds (TH<sub>Rec(max)</sub>, TH<sub>Dom(max)</sub>,TH<sub>Rec(min)</sub>,TH<sub>Dom(min)</sub>) can be defined with the structure ScopeDutyCycleDefinition.
The calculation of the duty cycle for a bus system can differ. For e.g. LIN the minimal duty cycle is defined as DutyCycleMin = tBusMin / 2*tBit and the maximum duty cycle is defined as DutyCycleMax = tBusMax / 2 * tBit for a recessive bit. The interpretation of the calculated values depends on the physical layer specification.
Methods
—Attributes
-
Keyword: BitField
- Description: The bit field e.g. LIN Sync Byte Field, of the bit used for the duty cycle measurement.
- Type: long
- Access Limitations: Read-only
-
Keyword: BitNo
- Description: The bit number within the field (starts with 0).
- Type: dword
- Access Limitations: Read-only
-
Keyword: BitStartTime
- Description: The time the bit started in ns.
- Type: int64
- Access Limitations: Read-only
-
Keyword: BitLevel
- Description:
- 0: Dominant
- 1: Recessive
- Type: byte
- Access Limitations: Read-only
- Description:
-
Keyword: SamplePointVoltage
- Description: The voltage of the bit at the sample point.
- Type: long
- Access Limitations: Read-only
-
Keyword: TDomMinOffset
- Description: Relative time in ns to BitStartTime where the voltage equals to THDomMin.
- Type: long
- Access Limitations: Read-only
-
Keyword: TDomMaxOffset
- Description: Relative time in ns to BitStartTime where the voltage equals to THDomMax.
- Type: long
- Access Limitations: Read-only
-
Keyword: TRecMinOffset
- Description: Relative time in ns to BitStartTime where the voltage equals to THRecMin.
- Type: long
- Access Limitations: Read-only
-
Keyword: TRecMaxOffset
- Description: Relative time in ns to BitStartTime where the voltage equals to THRecMax.
- Type: long
- Access Limitations: Read-only
-
Keyword: TBusMax
- Description: The maximal time of the bit.
- Type: long
- Access Limitations: Read-only
-
Keyword: TBusMin
- Description: The minimal time of the bit.
- Type: long
- Access Limitations: Read-only
-
Keyword: ScopeSamplePeriod
- Description: The sample period of the scope in [ns].
- Type: float
- Access Limitations: Read-only
-
Keyword: ScopeVoltageTolerance
- Description: The voltage tolerance of the scope measurement probe [mV].
- Type: float
- Access Limitations: Read-only