Skip to main content

​
CANstressSetResistor

Valid for: CANoe DE

​
Function Syntax

void CANstressSetResistor (dword resId, float value);

​
Description

Sets the value of a resistor for analog disturbances. This command will only take effect if permitted by the resistor layout set in the basic configuration. If the R_H layout is active, it will only be possible to set the RH resistor. If the CANstress device is inactive at this point, settings will only be applied once the CANstress device is active, i.e., once the trigger has been activated.

​
Parameters

  • resId: Sets the resistor whose value is to be defined:
    • 1 for RH
    • 2 for RSH
    • 3 for RHL
    • 4 for RSL
    • 5 for RL
  • value: New resistor value. The value is specified in ohms, whereby only multiples of 2.5 in the range between 0 and 10,237.5 are valid. In the event of values that may be invalid, a warning will appear in the test report. If an invalid value is transferred, it will be ignored (i.e., not applied) by the COM server.

​
Return Values

—

​
Example

— • Technical References are only available in English