Skip to main content

Documentation Index

Fetch the complete documentation index at: https://notevil.mintlify.app/llms.txt

Use this file to discover all available pages before exploring further.

Open topic with navigation CAPL Functions » General » Function Overview » setJitter

​
setJitter

Valid for: CANoe DE • CANoe:lite DE • CANoe4SW DE • CANoe4SW:lite DE

​
Function Syntax

setJitter(int min, int max);

​
Description

The Jitter interval for the timers of a network node can be set with this function. The two values may lie between –10000 and 10000 (corresponds to –100.00% to 100.00%). If one of the two values does not lie within this range, a message is output in the Write Window. Note: Setting of a Jitter will cause any existing Drift to be reset. To utilize Jitter and Drift simultaneously please refer to the example.

​
Parameters

  • min: Integer for the lower interval limit.
  • max: Integer for the upper interval limit.

​
Return Values

—

​
Example

...
// Set a Jitter with +–4 percent
setJitter(-400, 400);
...

...
// Set a Jitter with +–4 percent
// and a Drift of 17 percent
setJitter(1300, 2100);
...
getJitterMax • getJitterMin • setDrift • getDrift