CAPLfunctionsVTSystemOverview

VT System CAPL Functions

Valid for: CANoe DE • CANoe:lite DE

VT System

The methods/functions listed on this site can only be called in connection with system variables. Information about the differences between methods and functions can be found here.

ON THIS PAGE:

• General Methods/Functions
• Trigger Methods/Functions
• VT1004/VT1104 related Methods/Functions
• VT2004 related Methods/Functions
• VT2516 Methods/Functions
• VT2808 related Methods/Functions
• VT2816 related Methods/Functions
• VT2832 related Methods/Functions
• VT2848 related Methods/Functions
• VT7001 related Methods/Functions
• VT8006/VT8012 related Functions

General Methods/Functions

• SetTransferCycle

• vtsSetTransferCycle

  • Sets the cycle time for retrieving the corresponding value from the VT System.

• TestWaitForVTSStateRestore

  • Restores the default or start state of VT System channels.

Trigger Methods/Function

• SetTriggerParams

• vtsSetTriggerParams

  • Configures basic parameters for triggers.

• SetTriggerParamsEx

• vtsSetTriggerParamsEx

  • Configures additional parameters for VT System triggers.

• StartTrigger

• vtsStartTrigger

  • Starts the specified trigger. It also resets the event counter system variable that is associated to the trigger to 0.

VT1004/VT1104 related Methods/Functions

• ResetMinMax

• vtsResetMinMax

  • Resets the minimum and maximum value.

• SetLoadMode

• vtsSetLoadMode

  • Sets the mode for internal load.

• SetMeasurementMode

• vtsSetMeasurementMode

  • Sets the mode for voltage measurement.

• SetLoadControlTimeout

• vtsSetLoadControlTimeout

  • Sets the timeout for the internal load.

• SetPWMMeasurementDuration

• vtsSetPWMMeasurementDuration

  • Sets the PWM evaluation raster.

• SetPWMThreshold

• vtsSetPWMThreshold

  • Sets the PWM trigger threshold.

• SetImpedanceMode

• vtsSetImpedanceMode

  • Switches for VT1004A between the mode with high impedance (default state) and low impedance.

• SetIntegrationTime

• vtsSetIntegrationTime

  • Sets the integration time for average and RMS values.

VT2004 related Methods/Functions

• LoadWFResistance

• vtsLoadWFResistance

  • Loads a resistance curve for a channel from a specified file.

• LoadWFVoltage

• vtsLoadWFVoltage

  • Loads a voltage curve for a channel from a specified file.

• SetCurveType

• vtsSetCurveType

  • Sets the mode of the curve.

• SetStimulationMode

• vtsSetStimulationMode

  • Sets stimulation mode.

• StartStimulation

• vtsStartStimulation

  • Starts stimulation output.

• StopStimulation

• vtsStopStimulation

  • Stops stimulation output.

• SetPWMResistanceLow

• vtsSetPWMResistanceLow

  • Sets the resistance value for low on PWM output.

• SetPWMStartDelay

• vtsSetPWMStartDelay

  • Sets the delay of the start for the output of PWM signals and curves.

• SetPWMResistanceHigh

• vtsSetPWMResistanceHigh

  • Sets the resistance value for high on PWM output.

• SetPWMVoltageLow

• vtsSetPWMVoltageLow

  • Sets the low voltage on PWM output.

• SetPWMVoltageHigh

• vtsSetPWMVoltageHigh

  • Sets the high voltage on PWM output.

• SetPWMRepeats

• vtsSetPWMRepeats

  • Sets the number of stimulated PWM periods after the start of stimulation.

• SetWFParams

• vtsSetWFParams

  • Configures the parameters for the output of a voltage or resistance curve.

VT2516 Methods/Functions

• LoadWFBitStream

• vtsLoadWFBitStream

  • The function loads a bitstream for the channel from the specified file.

• SetCurveType

• vtsSetCurveType

  • Sets the mode of the bitstream.

• SetIntegrationTime

• vtsSetIntegrationTime

  • Sets the integration time for average values.

• SetPWMMeasurementDuration

• vtsSetPWMMeasurementDuration

  • Sets the max evaluation time for PWM signals.

• SetPWMRepeats

• vtsSetPWMRepeats

  • Sets the number of stimulated PWM periods after the start of stimulation.

• SetPWMVoltageHigh

• vtsSetPWMVoltageHigh

  • Sets the high voltage on digital output.

• SetPWMVoltageLow

• vtsSetPWMVoltageLow

  • Sets the low voltage on digital output.

• SetStimulationMode

• vtsSetStimulationMode

  • Sets stimulation mode.

• SetThreshold1_8

• vtsSetThreshold1_8

  • Sets the threshold value for differentiating between high and low levels of the channels 1…8 of a digital module VT2516.

• SetThreshold9_16

• vtsSetThreshold9_16

  • Sets the threshold value for differentiating between high and low levels of the channels 9…16 of a digital module VT2516.

• SetWFParams

• vtsSetWFParams

  • Configures the parameters for the output of a bitstream.

• StartStimulation

• vtsStartStimulation

  • Starts stimulation output.

• StopStimulation

• vtsStopStimulation

  • Stops stimulation output.

VT2808 related Methods/Functions

• ResetMinMax

• vtsResetMinMax

  • Resets the minimum and maximum value.

• SetMinCurrentMeasurementRange

• vtsSetMinCurrentMeasurementRange

  • Sets the current measurement range that should be used from the automatic measuring range changeover of the VT2808 module.

VT2816 related Methods/Functions

• LoadWFVoltage

• vtsLoadWFVoltage

  • Loads a voltage curve for a channel from a specified file.

• ResetMinMax

• vtsResetMinMax

  • Resets the minimum and maximum value.

• SetCurveType

• vtsSetCurveType

  • Sets the mode of the bitstream.

• SetIntegrationTime

• vtsSetIntegrationTime

  • Sets the integration time for average and RMS values.

• SetMeasurementMode

• vtsSetMeasurementMode

  • Sets the mode for voltage measurement.

• SetOutputRange

• vtsSetOutputRange

  • Sets the range that is used for analog output on output channels of VT2816 modules.

• SetWFParams

• vtsSetWFParams

  • Configures the parameters for the output of a bitstream.

• StartStimulation

• vtsStartStimulation

  • Starts stimulation output.

• StopStimulation

• vtsStopStimulation

  • Stops stimulation output.

VT2832 related Methods/ Functions

• SetOutputMask
• vtsSetOutputMask
  • Activates the requested rows of a switch matrix module for dynamic stimulation.

VT2848 related Methods/Functions

• LoadWFBitStream

• vtsLoadWFBitStream

  • The function loads a bitstream for the channel from the specified file.

• SetCurveType

• vtsSetCurveType

  • Sets the mode of the bitstream.

• SetOutputMode

• vtsSetOutputMode

  • Sets the mode for output on the channel.

• SetOutputSource

• vtsSetOutputSource

  • Sets the source for the high voltage level for output.

• SetPWMMeasurementDuration

• vtsSetPWMMeasurementDuration

  • Sets the max evaluation time for PWM signals.

• SetPWMRepeats

• vtsSetPWMRepeats

  • Sets the number of stimulated PWM periods after the start of stimulation.

• SetPWMStartDelay

• vtsSetPWMStartDelay

  • Sets the delay of the start for the output of PWM signals and curves.

• SetThreshold

• vtsSetThreshold

  • Sets the threshold value for differentiating between high and low levels of a group of channels on a VT2848 module.

• SetWFParams

• vtsSetWFParams

  • Configures the parameters for the output of a bitstream.

• StartStimulation

• vtsStartStimulation

  • Starts stimulation output.

• StopStimulation

• vtsStopStimulation

  • Stops stimulation output.

VT7001 related Methods/Functions

• <OnSerialError>

  • Is called when an error has occurred in an operation on a serial port.

• <OnSerialReceive>

  • Is called when data has been received from the assigned serial port.

• <OnSerialSend>

  • Is called when a send operation has been completed on the assigned serial port.

• LoadWFVoltage

• vtsLoadWFVoltage

  • Loads a control voltage curve for a power supply from a specified file.

• ResetMinMax

• vtsResetMinMax

  • Resets the minimum and maximum value.

• SerialClose

• vtsSerialClose

  • Closes the serial port of the VT System channel.

• SerialConfigure

• vtsSerialConfigure

  • Configures the serial port of the VT System channel.

• SerialOpen

• vtsSerialOpen

  • Opens the serial port of the VT System channel.

• SerialReceive

• vtsSerialReceive

  • Receives blocks of bytes from the serial port.

• SerialSend

• vtsSerialSend

  • Sends a block of bytes to the serial port.

• SetIntegrationTime

• vtsSetIntegrationTime

  • Sets the integration time for average values.

• SetInterconnectionMode

• vtsSetInterconnectionMode

  • Sets the mode for interconnection of the three possible power supplies and the two power outputs of the power module VT7001.

• SetMaxCurrentMode

• vtsSetMaxCurrentMode

  • Sets the mode for the control voltage output to control the power supply’s maximal output current.

• SetMinCurrentMeasurementRange

• vtsSetMinCurrentMeasurementRange

  • Sets the current measurement range that should be used from the automatic measuring range changeover of the VT7001 module.

• SetRefVoltageMode

• vtsSetRefVoltageMode

  • Sets the mode for the reference voltage output to control the power supply’s output voltage.

• SerialSetOnErrorHandler

• vtsSerialSetOnErrorHandler

  • Sets the callback that notifies when an error occurred during a send or receive operation.

• SerialSetOnReceiveHandler

• vtsSerialSetOnReceiveHandler

  • Sets the callback that notifies when data has been received on the serial port of the specified channel.

• SerialSetOnSendHandler

• vtsSerialSetOnSendHandler

  • Sets the callback that notifies when a send operation on the serial port of the specified channel is completed successfully.

• SetWFParams

• vtsSetWFParams

  • Configures the parameters for the output of a control voltage curve.

• StartStimulation

• vtsStartStimulation

  • Starts stimulation output.

• StopStimulation

• vtsStopStimulation

  • Stops stimulation output.

VT8006/VT8012 related Functions

• vtsSetBackplaneRelay
  • Closes/opens the auxiliary relay on a connected VT backplane.

VT System • Enumeration