CAPLfunctionSecurityLocalEncryptAES128CTR

SecurityLocalEncryptAES128CTR

CAPL Functions » Security » SecurityLocalEncryptAES128CTR

Valid for: CANoe DE • CANoe4SW DE

Function Syntax

long SecurityLocalEncryptAES128CTR(byte key[], dword keyLength, byte data[], dword dataLength, byte initVector[], dword initVectorLength, byte cipheredData[], dword cipheredDataLength)

Description

Encrypts data with a given key and initialization vector using AES128 (CTR), Padding Mode is not required.

Parameters

• byte key[]: The key to be used for AES (128 bit).
• dword keyLength: 16 (bytes).
• byte data[]: The data to encrypt.
• dword dataLength: The length of the data to encrypt.
• byte initVector[]: The init vector to be used.
• dword initVectorLength: 16 (bytes).
• byte cipheredData [] [Out]: The buffer in which the ciphered data is stored.
• dword cipheredDataLength [In/Out]: The length of the buffer. Typically this buffer should have the same length as the data to encrypt.

Return Values

• 1: Success. A value of 1 means that the action was successful.
• <= 0: Error. A value less than or equal to 0 means error.

Example

byte keyData[16] = {0x2b, 0x7e, 0x15, 0x16, 0x28, 0xae, 0xd2, 0xa6, 0xab, 0xf7, 0x15, 0x88, 0x09, 0xcf, 0x4f, 0x3c};
dword keyLength = elcount(keyData);
byte data[64] = {0x6b, 0xc1, 0xbe, 0xe2, 0x2e, 0x40, 0x9f, 0x96, 0xe9, 0x3d, 0x7e, 0x11, 0x73, 0x93, 0x17, 0x2a, 0xae, 0x2d, 0x8a, 0x57, 0x1e, 0x03, 0xac, 0x9c, 0x9e, 0xb7, 0x6f, 0xac, 0x45, 0xaf, 0x8e, 0x51, 0x30, 0xc8, 0x1c, 0x46, 0xa3, 0x5c, 0xe4, 0x11, 0xe5, 0xfb, 0xc1, 0x19, 0x1a, 0x0a, 0x52, 0xef, 0xf6, 0x9f, 0x24, 0x45, 0xdf, 0x4f, 0x9b, 0x17, 0xad, 0x2b, 0x41, 0x7b, 0xe6, 0x6c, 0x37, 0x10};
dword dataLength = elcount(data);
byte initVector[16] = {0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff};
dword initVectorLength = elcount(initVector);
byte cipheredOutput[64];
dword cipheredOutputLength = elcount(cipheredOutput);

long result;

result = SecurityLocalEncryptAES128CTR(keyData, keyLength, data, dataLength, initVector, initVectorLength, cipheredOutput, cipheredOutputLength);