Skip to main content
Open topic with navigation CAPL Functions » VT System » SetThreshold

​
SetThreshold

Valid for: CANoe DE • CANoe:lite DE Note
The function can only be called on system variable namespaces of appropriate channels of VT System modules.

​
Method Syntax

long SysVarNamespace.SetThreshold (eVTSThresholdGroup Group, double Threshold);

​
Description

Sets the threshold value for differentiating between high and low levels of a group of channels on a VT2848 module. There is only one threshold setting for each group. Voltages at the input exceeding this threshold value are evaluated as high level and voltages undershooting it are evaluated as low level.

​
Parameters

  • Group: Values see eVTSThresholdGroup
  • Threshold: Voltage value in volts in the range from 0…40 V.

​
Return Values

  • 0: Successful call
  • -1: Call error
  • -2: The namespace on which the command was called does not exist, is not a valid VT System namespace or does not support this command.
  • -3: The specified threshold is not valid
  • -4: The function wasn’t called in the context of the main method of a test module. So it is not possible to wait until the setting will be taken over from the VT System. Otherwise the call was successful but it is not sure if the settings have been taken over already when the call returns.

​
Example

The following example demonstrates how to configure the first channel of a VT2848 module for PWM measurement. The channel used in this example is called RPM_Sensor, the VT2848 is called Sensors.

​
CAPL

PWMMeasurement ()
{
  // Set the PWM thresholds of channels 1 to 8 to 2.5V
  sysvar::VTS::Sensors.SetThreshold(eVTSThresholdGroupChannels1To8, 2.5);

  // Set the PWM measurement duration of the first channel to 100ms
  sysvar::VTS::RPM_Sensor.SetPWMMeasurementDuration(0.1);

  // Wait 500ms and output the measured PWM frequency and duty cycle
  TestWaitForTimeout(500);
  write("Measured frequency %fHz and DC %f", @sysvar::VTS::RPM_Sensor::PWMFreq, @sysvar::VTS::RPM_Sensor::PWMDC);
}

​
.NET (C#)

private void Example3()
{
    IVTSystem vts = VTSystem.Instance;
    // Get the VT2848 module
    IVT2848 sensors = vts.GetModule<IVT2848>("Sensors");

    // Set the PWM thresholds of channels 1 to 8 to 2.5V
    sensors.Threshold1To8.Value = 2.5;

    // Set the PWM measurement duration of the first channel to 100ms
    sensors.Channel1.PWMMeasurementDuration.Value = 0.1;

    // Wait 500ms and output the measured PWM frequency and duty cycle
    Execution.Wait(500);
    Output.WriteLine(string.Format("Measured frequency {0}Hz and DC {0}%", sensors.Channel1.PWMFreq.Value, sensors.Channel1.PWMDC.Value));
}

​
VT System Control

VT System Control
  • Select Sensors
  • Set Sidebar | Thresholds | Channel 1 to 8 to 2.5
  • Select RPM_Sensor
  • Set Sidebar | PWM Measurement | Meas. Duration to 0.1
  • Wait for 500ms
  • Check measurement values ‘PWMFreq’ and ‘PWMDC’
vtsSetThreshold