Skip to main content
Open topic with navigation CAPL Functions » Smart Charging » SCC Modeling Libraries (Simulation Setup) » SLAC Test Functions » Shared Functions » SCC_CreateCM_Set_Key_Cnf

​
SCC_CreateCM_Set_Key_Cnf

Valid for:  CANoe DE  •  CANoe4SW DE Note
The Result code representation (0x01=“Success”/0x00=“Failure”) is according to the Qualcomm specification, which has also been adopted by other PLC-chip manufacturers.

​
Function Syntax

void SCC_CreateCM_Set_Key_Cnf ( byte SourceMac[], byte TargetMac[], dword Result )

​
Description

Creates a CM_Set_Key.Cnf message for sending.

​
Parameters

  • SourceMac: Source address of the Ethernet packet.
  • TargetMac: Destination address of the Ethernet packet.
  • Result: Result code:
    • 0x00 = failure
    • 0x01 = success
    • 0x02-0xFF = reserved

​
Additional Parameters

  • Index 0: MyNonce, byte[], 4 byte random number.
  • Index 1: YourNonce, byte[], Last received nonce (4 byte).
  • Index 2: PID, dword, Protocol ID.
  • Index 3: PRN, byte[], Protocol Run Number (2 byte).
  • Index 4: PMN, dword, Protocol Message Number.
  • Index 5: CCoCapability, dword, STA’s CCo Capability.

​
Return Values

—

​
Example

—