Skip to main content
Open topic with navigation CAPL Functions » Smart Charging » SCC Modeling Libraries (Simulation Setup) » V2G Test Functions » Shared Functions » SCC_CreateCurrentDemandRes_ISO

​
SCC_CreateCurrentDemandRes_ISO

Valid for: CANoe DE • CANoe4SW DE

​
Function Syntax

long SCC_CreateCurrentDemandRes_ISO 
( byte SessionID[], char ResponseCode[], 
long NotificationMaxDelay, char StatusCode[], 
char Notification[], float PresentValues[], 
byte LimitAchievedFlags[], char EVSEID[], 
long SAScheduleTupleID )

​
Description

Creates a Current Demand Response message for sending.

​
Parameters

  • SessionID: 8-byte long SessionID of SCC connection, range: 0 - 0xFF FF FF FF FF FF FF FF.
  • ResponseCode: Acknowledgment status of the message. See SCC_SetResponseCode.
  • NotificationMaxDelay: Time until the vehicle is expected to react on the notification (for DC_EVSEStatus).
  • StatusCode: Internal state of the EVSE (for DC_EVSEStatus).
  • Notification: Notification about an action that the charge point wants the vehicle to perform (for DC_EVSEStatus).
  • PresentValues:
    • PresentValues [0] = EVSEPresentVoltage
    • PresentValues [1] = EVSEPresentCurrent
  • LimitAchievedFlags:
    • LimitAchievedFlags [0] = EVSECurrentLimitAchieved
    • LimitAchievedFlags [1] = EVSEVoltageLimitAchieved
    • LimitAchievedFlags [2] = EVSEPowerLimitAchieved
  • EVSEID: Unique ID of the charge point.
  • SAScheduleTupleID: ID of the selected SAScheduleTuple.

​
Optional Parameters

  • Index 0: IsolationStatus (char[]) - Current isolation condition.
  • Index 1: MaxVoltage (float) - EVSEMaximumVoltageLimit.
  • Index 2: MaxCurrent (float) - EVSEMaximumCurrentLimit.
  • Index 3: MaxPower (float) - EVSEMaximumPowerLimit.
  • Index 4: ReceiptRequired (long) - Indicates if the vehicle is required to send a MeteringReceiptReq.
  • Index 5: MeterID (char[]) - Unique ID of the meter.
  • Index 6: MeterReading (dword) - Current meter reading in Wh.
  • Index 7: SigMeterReading (byte[]) - Signature of the meter reading (length 64).
  • Index 8: MeterStatus (long) - Current status of the meter.
  • Index 9: TMeter (long) - Timestamp of the current SECC time.
Note: Due to the requirements of the schema, the element MeterID is mandatory if any of the optional meter-related parameters are to be supplied.

​
Return Values

  • 1: If successful.
  • 0: Else (message cannot be sent).

​
Example

—