CAPLfunctionGBT27930ILSetDelayForStateTransition

Open topic with navigation

CAPL Functions » J1939 » GB/T 27930 IL » GBT27930IL_SetDelayForStateTransition

GBT27930IL_SetDelayForStateTransition

Valid for: CANoe DE • CANoe4SW DE

Function Syntax

long GBT27930IL_SetDelayForStateTransition(dword stateTransition, dword delay); // form 1
long GBT27930IL_SetDelayForStateTransition(dbNode node , dword stateTransition, ddword delay); // form 2

Description

Defines delay for a state transition.

Parameters

• stateTransition: State transition to be delayed. The following values are defined:

  • 11: After the K3 and K4 are closed (resp. GBT27930IL_StartChargingSimulation() is called): Start sending of CHM
  • 0:
    • Charger: After the appearance of the BHM: Stop sending of CHM and start sending of CRM (BMS is not recognized)
    • BMS: After the appearance of the CHM: Start sending of BHM
  • 1:
    • Charger: After the appearance of the BRM: Stop sending of CRM (BMS is not recognized) and start sending of CRM (BMS is recognized)
    • BMS: After the appearance of the CRM (BMS is not recognized): Stop sending of BHM and start sending of BRM
  • 2:
    • Charger: After the appearance of the BCP: Stop sending of CRM (BMS is recognized) and start sending of CML
    • BMS: After the appearance of the CRM (BMS is recognized): Stop sending of BRM and start sending of BCP
  • 3:
    • Charger: After the appearance of the BRO (Ready for charging): Stop sending of CML and start sending of CRO (Not ready for charging)
    • BMS: After the appearance of the CML: Stop sending of BCP and start sending of BRO (Not ready for charging)
  • 4:
    • Charger: After the sending of CRO (Not ready for charging) is started: Stop sending of CRO (Not ready for charging) and start sending of CRO (Ready for charging)
    • BMS: After the sending of BRO (Not ready for charging) is started: Stop sending of BRO (Not ready for charging) and start sending of BRO (Ready for charging)
  • 5:
    • Charger: After the appearance of the BCS: Stop sending of CRO (Ready for charging) and start sending of CCS
    • BMS: After the appearance of the CRO (Not ready for charging): Stop sending of BRO (Ready for charging) and start sending of BCL
  • 15:
    • BMS: After the sending of BCL is started: In addition to sending BCL, start sending BCS
  • 6:
    • Charger: After the appearance of the BST: Stop sending of CCS and start sending of CST. This is used when the BMS suspends charging.
    • BMS: After the appearance of the CCS: In addition to sending BCL and BCS, start sending BSM. If configured, BMV and BMT are also sent.
  • 16:
    • BMS: After the appearance of the CST: Stop sending of BST and start sending of BSD. This is used when the BMS suspends charging.
  • 7:
    • Charger: After the appearance of the BSD: Stop sending of CST and start sending of CSD
    • BMS: After the appearance of the CST: Stop sending of BCL, BCS and BSM and start sending of BST. This is used when the Charger suspends charging.
  • 8:
    • Charger: After the sending of the CSD is started: Stop sending of CSD, end of charging
    • BMS: After the sending of the BST is started: Stop sending of BST and start sending of BSD. This is used when the Charger suspends charging.
  • 9:
    • BMS: After the sending of the BSD is started: Stop sending of BSD, end of charging

• delay: Time (in ms) for which the state transition is to be delayed.

• node: Simulation node to apply the function.

Return Values

• 0: on success
• < 0: IL Error Code

Example

variables
{
  enum DelayTransition
  {
    chm_to_bhm              = 0,
    crmNotRecognized_to_brm = 1,
    crmRecognized_to_bcp    = 2,
    cml_to_broNotReady      = 3,
    broNotReady_to_broReady = 4,
    croReady_to_bcl         = 5,
    bcl_to_bcl_bcs          = 15,
    ccs_to_bcl_bcs_bsm      = 6,
    cst_to_bsd              = 16,//BMS suspends charging
    cst_to_bst              = 7, //Charger suspends charging
    bst_to_bsd              = 8, //Charger suspends charging
    bsd_to_end              = 9
  }
}

on start
{
  GBT27930IL_InitAsBMS();
  GBT27930IL_SetDelayForStateTransition(chm_to_bhm,              500);
  GBT27930IL_SetDelayForStateTransition(crmNotRecognized_to_brm, 500);
  GBT27930IL_SetDelayForStateTransition(crmRecognized_to_bcp,    500);
  GBT27930IL_SetDelayForStateTransition(cml_to_broNotReady,      500);
  GBT27930IL_SetDelayForStateTransition(broNotReady_to_broReady, 500);
  GBT27930IL_SetDelayForStateTransition(croReady_to_bcl,         500);
  GBT27930IL_SetDelayForStateTransition(bcl_to_bcl_bcs,          500);
  GBT27930IL_SetDelayForStateTransition(ccs_to_bcl_bcs_bsm,      500);
  GBT27930IL_SetDelayForStateTransition(cst_to_bsd,              500);
  GBT27930IL_SetDelayForStateTransition(cst_to_bst,              500);
  GBT27930IL_SetDelayForStateTransition(bst_to_bsd,              500);
  GBT27930IL_SetDelayForStateTransition(bsd_to_end,              500);
}