Skip to main content

​
J1939ILRemoveDTC

Valid for: CANoe DE • CANoe4SW DE

​
Function Syntax

  • long J1939ILRemoveDTC(dword pgn, dword spn, byte fmi); // form 1
  • long J1939ILRemoveDTC(dword pgn, dword spn); // form 2
  • long J1939ILRemoveDTC(dbNode node, dword pgn, dword spn, byte fmi); // form 3
  • long J1939ILRemoveDTC(dbNode node, dword pgn, dword spn); // form 4

​
Description

This function removes a diagnostics trouble code (DTC) from a diagnostics message which has been added by J1939ILAddDTC. Form 2 and 4 removes all DTCs with the specified SPN (regardless of FMI). A removed DTC is no longer reported by the message if the message is requested. Note: You can use this function only if support of J1939 Diagnostics is enabled by function J1939ILActivateDiagnosticsSupport.

​
Parameters

  • pgn: Parameter Group Number (PGN) of the message which shall contain the DTC.
  • spn: Suspect Parameter Number of the deactivated DTC, 0..524287.
  • fmi: Failure Mode Indicator of the deactivated DTC, 0.. 31.
  • node: Simulation node to apply the function.

​
Return Values

  • 0: success
  • < 0: An error has occurred: IL Error Code
  • -803: Failed to activate DTC because diagnostics support is not activated
  • -804: Failed to activate DTC because DTC not found

​
Example

—