Skip to main content

​
DoIP_ConfigureRoutingActivationRequest

Valid for: CANoe DE Note
The following DoIP CAPL function is only available with the modeling library DoIP.dll and eventually an appropriate implementation of the CAPL Callback Interface. Information about the DoIP DLL and the CAPL Callback Interface you find here:

​
Function Syntax

void DoIP_ConfigureRoutingActivationRequest(long mode, dword activationType, dword valueReserved);

​
Description

Configures the Routing Activation Request Message sent by a tester.

​
Parameters

  • mode
    0: Do not send a routing activation type
    1: Send 1 byte activation type, value must be <= 0xFF (default)
    2: Send 2 byte activation type, value must be <= 0xFFFF
  • activationType
    The value to send if an activation type is configured (i.e. mode is equal to 1 or 2).
  • valueReserved
    The value of the reserved field in the message.

​
Return Values

—

​
Example

You can also configure these values in the DoIP.INI file. 
// Send the 2 byte activation type 0x1234, and set the reserved field
DoIP_ConfigureRoutingActivationRequest( 2, 0x1234, 0x76543210);