Skip to main content

​
coTfsLssAddMasterResponseConfigureBitTiming (Level 2)

Valid for: CANoe DE • CANoe:lite DE • CANoe4SW DE

​
Function Syntax

long coTfsLssAddMasterResponseConfigureBitTiming( dword tableSelector, dword tableSelectorMask, dword tableIndex, dword tableIndexMask, dword errCode, dword specError );

​
Description

This function adds a single LSS Master request wait condition to the internal list of LSS Master request wait conditions and sends a response if a request is received.

​
Parameters

  • tableSelector: Selects which bit timing parameter table shall be used.
    • 0 - standard CiA® bit timing table
    • 1..127 - reserved
    • 128..255 - may be used for manufacturer specific bit timings
  • tableSelectorMask: Mask for table selector; set bits are compared, not set bits are not compared.
  • tableIndex: CAN bitrate index.
    • 0 = 1 MBit/s
    • 1 = 800 kBit/s
    • 2 = 500 kBit/s
    • 3 = 250 kBit/s
    • 4 = 125 kBit/s
    • 5 = 100 kBit/s (reserved value, do not use)
    • 6 = 50 kBit/s
    • 7 = 20 kBit/s
    • 8 = 10 kBit/s
  • tableIndexMask: Mask for table index; set bits are compared, not set bits are not compared.
  • errCode: Error code.
    • 0 - protocol successfully completed
    • 1 - bit timing not supported
    • 255 - implementation specific error occurred
  • specError: Manufacturer specific error (used if error code = 255).

​
Return Values

Error code