Skip to main content

​
coTfsLssWaitForConfigureBitTimingRequest (Level 2)

Valid for: CANoe DE • CANoe:lite DE • CANoe4SW DE

​
Function Syntax

long coTfsLssWaitForConfigureBitTimingRequest( byte[] pTableSelector, byte[] pTableIndex );

​
Description

This function waits for LSS Configure Bit-Timings Parameters request.

​
Parameters

  • pTableSelector: Selects which bit timing parameter table shall be used.
    • 0 - standard CiA® bit timing table
    • 1..127 - reserved
    • 128..255 - may be used for manufacturer specific bit timings
  • pTableIndex: CAN bitrate index.
    • 0 = 1 MBit/s
    • 1 = 800 kBit/s
    • 2 = 500 kBit/s
    • 3 = 250 kBit/s
    • 4 = 125 kBit/s
    • 5 = 100 kBit/s (reserved value, do not use)
    • 6 = 50 kBit/s
    • 7 = 20 kBit/s
    • 8 = 10 kBit/s

​
Return Values

Error code

​
Example

byte pTableSelector[1];
byte pTableIndex[1];

/* waits for LSS configure bit timing request */
if (coTfsLssWaitForConfigureBitTimingRequest( pTableSelector, pTableIndex) == 1) {
  /* received LSS configure bit timing request */
  /* received values can be found in pTableSelector[0], pTableIndex[0] */
} else {
  /* no request received */
  return;
}